 |
 |
 |
Selective Rack Design with the most up-to-data technology. This is the best solution for 100 access to all pallets stored. Such system gives a direct and unitary access to each load, so that you are able to have as many types of products as all pallets.
All frames and beams are manufactured from cold rolled
profile of the best quality steel.
 |
Best suited for the storage of large size and heavy-weight items. Such as a palletized unit load. Items are handled by fork lift truck. |
|
Standardized components make the assembly, disassembly, transfer, layout and change of rack quite easy in a short time without using
special tools. |
|
Beam level can be adjusted at 75 mm. Intervals. |
|
|
 |
 |
 |
Drive-In Racking system is Ideal to store large amounts of the same product making the most of the available volume, as a result of eliminating most of the gangways.
The drive-in rails are designed for pallets using the most-modern safety measures.
|
Storage space is also utilized for the passage way of fork lift trucks. |
|
Storage capacity can be remarkably increased compared to conventional storage racks. |
|
Items stored first are taken out last. |
|
|
 |
Push Back Rack can get more advantage between Drive-in and FIFO Rack, due to the combined convenience to be always selective from the bulky multi-deeps itself, and its high density storage, without aisles inside the store-room.
This being suitable for COLD-STORAGE in energy-saving in particular. The more safe and saving for human and handling equipment.
|
 |
The best solution for the storage of product which requires perfect rotation, based on the FIFO system (First-in first-out). The loading travels on rollers of high technology, quaranteeing smooth running. Among its several advantages, it makes the most of the available space with the minimum manpower cost.
|
Free wheel or free roller mounted shelves are equipped with a slope from the storing side to the pick-up side. |
|
Item fed on the storing side flows down to the pick-up side, thereby permitting a first-in, first-out system |
|
|
| Order Picking Racking System |
 |
Efficient utilization of space is achieved by providing bulk storage above the order picking racks. In this case, it is desirable to keep the horizontal beam length of the order picking system equal to the required bean length of the pallet racking sections. With the wide bays box beams we suggested can be realized.
|
 |
The mobile racking system is designed for space conservation, a lot of aisles between rack is redundant, leading to the
maximum storage capacity. Several racks may share the same aisle space, while the unused rack is in closed position.
The mobile systems are capable to store two or three times the quantity of a given commodity in the same space, comparing to the selective (conventional fixed systems) rack.
|
 |
The slide racking system completes with heavy duty shelving in vertically stacked, it allows ease of retrieving heavy items. The slide-back pallet can keep aisles free, then saving space to use single narrow aisle for two side of racking.
The slide racks will provide most flexibility and productivity for storing the moulds and dies with large volume and interchangeability.
|
| Long Profile Racking System |
 |
This is an ideal system for storing all types of long profiles, metal or plastic tubes, wood panels etc, from which can be interchangeable and modular, hence allowing to keep the different product in the same area.
|
Arm rack is one side holding structure without two front columns. |
|
Due to the flat surface in succession, the long items could be varied size items. |
|
Items can be checked clearly for controlling. |
|
|
|
